Login
Main menu

Issue 3, 2017

Valitov V.A. Deformation in Superplasticity Regime – an Effective Method of Producing Components from Hetero- Phase Nickel-Based Alloys with Functional-Gradient Properties
DOI: 10.17277/amt.2017.03.pp003-013

3

Milyaev I.M., Alymov M.I., Yusupov V.S., Zelensky V.A., Milyaev A.I., Ankudinov A.B. Hard Magnetic Properties of Mn-Al-C Alloys Doped with Titanium and Iron 
DOI: 10.17277/amt.2017.03.pp014-016

14

Stelmakh L.S., Stolin A.M. Computer Modelling of New Experimental Schemes of SHS-Extrusion
DOI: 10.17277/amt.2017.03.pp017-023

17

Sanin V.N., Ikornikov D.M., Andreev D.E., Sachkova N.V., Yukhvid V.I. Synthesis of Cast High Entropy Alloys with a Low Specific Gravity by Centrifugal Metallothermic SHS-Methods
DOI: 10.17277/amt.2017.03.pp024-033

24

Kulnitskiy B.A., Blank V.D. Iron Carbide Formation inside Carbon Nanotubes
DOI: 10.17277/amt.2017.03.pp034-039

34

Bazhin P.M., Stolin A.M., Konstantinov A.S. The Impact of Mechanical Effects on Granulometric Composition of TiB2 – Based Materials
DOI: 10.17277/amt.2017.03.pp040-043

40

Pervukhina O. L., Denisov I.V. The Specifics of Producing Steel to Brass Bimetal Using Explosion Welding
DOI: 10.17277/amt.2017.03.pp044-046

44

Khachaturova T.A. Volt-Ampere Characteristics of Tunnel Junctions from Ferromagnetic Materials
DOI: 10.17277/amt.2017.03.pp047-050

47

Akulinin  E.I., Ishin A.A., Skvortsov S.A., Dvoretsky D.S., Dvoretsky S.I.Optimization  of  Adsorption  Processes with Cyclic Variable Pressure in Gas Mixture Separation
DOI: 10.17277/amt.2017.03.pp051-060

51 

Vigdorovich V.I., Zhukovskaya Т.V., Tsygankova L.E., Esina M.N., Shel N.V. Analytical Evaluation of the Amount of Extracted Quantities of Sorbate and Sorbent Dynamic Capacity under Sorption Purification of Flow Solutions
DOI: 10.17277/amt.2017.03.pp061-066

61 

Yartsev V.P. Cement and Gypsum Concretes with Construction Aggregates and Industrial Wastes
DOI: 10.17277/amt.2017.03.pp067-076

67 

Abstracts in Russian

77

 

Issue 2, 2017

Muromtsev D.Yu. Main Trends in the Development of R&D and Higher Qualification Faculty Training Department at Tambov State Technical University

3

Alymov M.I., Milyaev I.M., Yusupov V.S., Milyaev A.I. Nanocrystalline Hard Magnetic Materials
DOI: 10.17277/amt.2017.02.pp010-018

10

Komarov F.F., Tkachev A.G., Milchanin O.V., Parfimovich I.D., Grinchenko M.V., Parkhomenko I.N., Bychenok D.S. A Composite Based On Epoxy Polymer and Carbon Nanotubes: Structure, Optical Properties and Interaction with Microwave Radiation
DOI: 10.17277/amt.2017.02.pp019-025

19

Podestà L., Sforza G., Churikov A., Divin A., Filatova A. Wireless Sensors-Based Network to Measure Different Power Quality Disturbances
DOI: 10.17277/amt.2017.02.pp026-037

26

Akulinin E.I., Ishin A.A., Skvortsov S.A., Dvoretsky D.S., Dvoretsky S.I. Mathematical Modeling of Hydrogen Production Process by Pressure Swing Adsorption Method
DOI: 
10.17277/amt.2017.02.pp038-049

38

Mukhin V.M., Burakov A.Ye., Burakova I.V. Active Carbon as Nanoporous Material for Solving Environmental Problems
DOI: 
10.17277/amt.2017.02.pp050-056

50

Vigdorovich V.I., Kolenchin N.V. The Effect of Ozonizing Sulfuric Acid Electrolyte with or without Ultrasonic Field on Anodizing some Aluminum Alloys
DOI: 10.17277/amt.2017.02.pp057-066

57

Altunin K.A., Sokolov M.V. Development of Information Support for Intelligent CAD of Cutting Processes
DOI: 10.17277/amt.2017.02.pp067-077

67

Abstracts in Russian

78

  

Issue 1, 2017

Krasnyansky M.N. Foreword to the Issue

3

Stolin A.M., Alymov M.I. Report on the XIV All-Russian School on Structural Macrokinetics for Young Scientists

4

Sanin V.N., Likhanova O.O. Solid Basis for “Solid Flame”

6

Acurio E., García-Cruz L., Montiel V., Iniesta J. Preparation of Poly(Vinyl) Alcohol/Chitosan Hybrid Membranes Doped with Graphene Nanosheets
DOI: 
10.17277/amt.2017.01.pp009-019

9

Dimitri R., Li Y., Fantuzzi Ni., Tornabene F. Innovative Modeling of the Crack Path and Stress Intensity Factor for Arbitrary Shaft Configurations
DOI: 
10.17277/amt.2017.01.pp020-035

20

Khina B.B., Goranskiy G.G. Thermodynamics of Multicomponent Amorphous Alloys: Theories and Experiment Comparison
DOI: 
10.17277/amt.2017.01.pp036-043

36

Kulikov G.M., Carrera E., Plotnikova S.V. Hybrid-Mixed Quadrilateral Element for Laminated Plates Composed of Functionally Graded Materials
DOI: 
10.17277/amt.2017.01.pp044-055

44

Malygin  E.N.,  Karpushkin  S.V.,  Krasnyansky  M.N.,  Glebov  A.O.,  Karpov  S.V. Mathematical Modeling of Nonstationary Heat Processes of Thermal Treatment of Metal Products with Enhanced Hardness
DOI: 10.17277/amt.2017.01.pp056-064

56

Tugolukov E.N., Egorov S.Ya., Egorov E.S. Information Systems and Technology of Using Substance Properties in Calculations
DOI: 10.17277/amt.2017.01.pp065-070

65

Nemtinov V.А., Sergeyev V.S., Nemtinova Yu.V., Mokrozub V.G. Technology and Equipment for Friction Welding of Thin-Walled Parts Made of Mineral-Filled Polypropylene
DOI: 10.17277/amt.2017.01.pp071-075

71

Abstracts in Russian

77

  

Issue 4, 2016

By the Russian Federation Government Decree No. 2088-p of October 5, 2016, Moscow

3

Abstract-Presentation of the Work “Development of the Scientific Fundamentals and Domestic Production of Carbon Nanostructures of «Taunit» Series – Modifiers of Special-Purpose Structural and Functional Materials”

3

Stolin A.M., Alymov M.I. The History of the Academic Institute ISMAN
DOI: 10.17277/amt.2016.04.pp.006-010

6

Morgunov R.B., Talantsev A.D., Kunitsyna E.I., Piskorskii V.P., Kablov E.N., Ospennikova O.G. A Giant Increase in the Coercive Force of (PrDy)(CoFe)B Microparticles Ensemble in the Polymer Matrix
DOI: 10.17277/amt.2016.04.pp.011-015

11

Scherbakov V.A., Gryadunov A.N., Alymov M.I. Synthesis and Characteristics of B4C-TiB2 Composite
DOI: 10.17277/amt.2016.04.pp.016-021

16

Yukhvid V. I. SHS-Metallurgy: Fundamental and Applied Research
DOI: 10.17277/amt.2016.04.pp.023-034

23

Plewa A., Belyaev P.S., Andrianov K.A., Zubkov A.F., Frolov V.A. The Effect of Modifying Additives on the Consistency and Properties of Bitumen Binders
DOI: 10.17277/amt.2016.04.pp.035-040

35

Vigdorovich V.I., Tsygankova L.E., Shel N.V., Balybin D.V., Kryilskiy D.V. Control of Kinetic Parameters and Rate-Determining Step Nature of Hydrogen Evolution Reaction on Iron
DOI: 10.17277/amt.2016.04.pp.041-045

41

Selivanov Yu.T.  Modeling of Classification Process in a Continuous Trommel Screen
DOI: 10.17277/amt.2016.04.pp.046-052

46

Kochetov V.I., Baronin G.S. Methods of Calculating the Moulding Instrument Profile for Creating the Set Molecular Orientation in the Finished Product Made of Ultra High Molecular Weight Polyethylene
DOI: 10.17277/amt.2016.04.pp.053-060

53

Abonosimov O.A. A Study on Kinetic Characteristics of Reverse Osmosis Separation of Wastewater Containing Heavy Metals Ions
DOI: 10.17277/amt.2016.04.pp.061-070

61

Divin A.G., Ponomarev S.V., Liubimova D.A. Experimental Determination of the Thermophysical Properties of Polygraphene-Based Pastes
DOI: 10.17277/amt.2016.02.pp.071-076

71

 

 

Abstracts in Russian

77

 

Issue 3, 2016

Tkachev A.G. Innovation Nanoindustry Cluster of Tambov State Technical University

3

Golovin. Yu.I. Institute “Nanotechnology and nanomaterials” at G. R. Derzhavin Tambov State University

7

Matsumoto K., Yamato H., Akita K., Fujimura T. Effect of Nanodiamond on Removal of Cesium from Soil by Potassium Ferrocyanide
DOI: 10.17277/amt.2016.03.pp.009-013

9

Kheifets M.L. Self-Organization of Structure Formation Processes in Intense Treatment and Operation of Materials
DOI: 10.17277/amt.2016.03.pp.014-020

14

Valitov V.A. Nickel Alloys Structure and Properties Control by Deformation-Thermal Treatment in Solid State
DOI: 10.17277/amt.2016.03.pp.021-031

21

Golovin Yu.I. The Nature and Multiscale Techniques for Characterizatoin of Mechanical Properties: from Nanostructured Materials to Single Macromolecules. Part III. Nanoindentation and Atomic Mechanisms of Local Plastic Deformation
DOI: 10.17277/amt.2016.03.pp.032-047

32

Vigdorovich  V.I., Tsygankova L.E., Tanygina E.D., Tanygin A.Yu., Shel N.V. New Conservation Materials on the Base of Colza Oil for the Steel Protection against Atmospheric Corrosion
DOI: 10.17277/amt.2016.03.pp.048-052

48

Shchegolkov A.V., Galunin E.V., Shchegolkov A.V. (Jr.), Zyablova A.M., Memetov N.R., Korotkov S.V. The Study of  Operating  Parameters  of a Graphene Electrode-Based Supercapacitor by the Voltmeter-Ammeter Method
DOI: 10.17277/amt.2016.03.pp.053-060

53

Lavrenchenko A.A., Lazarev D.S., Khorokhorina I.V., Golovin Yu.M., Polikarpov V.M., Lazarev S.I. A Study of Some Physical Problems of Water Condition and Mass Transfer in Cellulose Acetate and Dynamic Membranes
DOI: 10.17277/amt.2016.03.pp.061-068

61

Promtov  M.A,  Pigarev S. Technology for Improving Water-Fuel Oil Emulsions Properties Using Polycarboxylic Acids
DOI: 10.17277/amt.2016.02.pp.069-080

69

 

 

Abstracts in Russian

81

 

Issue 2, 2016

 

Shtarbakov V., Stavrev D. Microstructure of Laser Welded-on Layers of 32CrMoV12-28 Steel with Maraging Alloy in Ageing
DOI: 10.17277/amt.2016.02.pp.003-007

3

Khina B.B., Goranskiy G.G. Thermodynamic Properties of Multicomponent Amorphous Alloys in Systems Fe-Si-B-Ni and Fe-Si-B-Ni-Co-Cr-Mo
DOI: 10.17277/amt.2016.02.pp.008-015

8

Montaev S.A., Loganina V.I., Adilova N.B., Shakeshev B.T. Lime Mortars Modified by Complex Silica Sol Additives
DOI: 10.17277/amt.2016.02.pp.016-022

16

Golovin Yu.I. The Nature and Multiscale Techniques for Characterization of Mechanical Properties: from Nanostructured Materials to Single Macromolecules. Part II.Strength of low-dimensional materials
DOI: 10.17277/amt.2016.02.pp.023-034

23

Simagin D.N., Gravin A.A., Kulakov V.Yu., Litovka Yu.V., Dyakov E.A. The Effect of TAUNIT Carbon Nanotubes on the Properties of Electroplating and Anodic Oxide Coatings
DOI: 10.17277/amt.2016.02.pp.035-042

35

Smolikhina P.M., Muratova E.I., Dvoretsky S.I. The Study of Structure Formation Processes in the Confectionery Mass
DOI: 10.17277/amt.2016.02.pp.043-047

43

Tugolukov E.N., Galunin E.V., Tarov A.V., Memetov N.R., Tkachev A.G. Mathematical Modeling of Ammonium Persulfate Granules Dissolution in Sulfuric Acid
DOI: 10.17277/amt.2016.02.pp.048-052

48

Dmitriev O.S., Zhyvenkova A.A., Dmitriev A.O. Thermo-Chemical Analysis of the Cure Process of Thick Polymer Composite Structures for Industrial Applications
DOI: 10.17277/amt.2016.02.pp.053-060

53

Erofeev A.V.,Yartsev V.P. Development of Durable Exterior Insulation Finishing Systems Based on Composite Timber Technology for Building Facades
DOI: 10.17277/amt.2016.02.pp.061-068

61

Popov V.Yu., Khorokhorina I.V., Golovin Yu.M., Polikarpov V.M., Lazarev S.I. An X-Ray Scattering Study of MGA-95 and ESPA Composite Membranes
DOI: 10.17277/amt.2016.02.pp.069-076

69

 

 

Abstracts in Russian

77

 

Issue 1, 2016

 

Editor’s Note (Mikhail I. Alymov Editor-in-Chief and Mikhail N. Krasnyansky Chair of Editorial Board)

3

Bazhin P. M., Stolin A. M., Chizhikov A. P., Konstantinov A. S., Mikheyev M. V. The Effect of Mechanical Treatment on the Phase Formation of the Synthesized Material Based on Molybdenum Disilicide 
DOI: 10.17277/amt.2016.01.pp.004-008

4

Sukhorukov R. Yu., Sidorov A. A., Alimov A. I., Nagimov M. I., Utyashev F. Z. Mathematical and Physical Modeling of the Rolling Process of Tapered Shafts for Aviation Purposes 
DOI: 10.17277/amt.2016.01.pp.009-016

9

Safarov M. M., Davlatov N. B., Gulomov M. M., Zaripova M. A. Effect of Fullerenes C60,C70 and CNTs on the Thermophysical Properties of Nitrogen- and Oxygen-Containing Liquids (Rocket Fuel) 
DOI: 10.17277/amt.2016.01.pp.017-028

17

Golovin Yu. I. The Nature and Multiscale Techniques for Characterizatoin of Mechanical Properties: from Nanostructured Materials to Single Macromolecules. Part I. Theoretical Strength. Size Effects 
DOI: 10.17277/amt.2016.01.pp.029-041

29

Romantsova I. V., Burakov A. E., Kucherova A. E., Neskoromnaya E.A., Babkin A. V.,Tkachev A. G. Liquid-Phase Adsorption of an Organic Dye on Non-Modified and Nanomodified Activated Carbons: Equilibrium and Kinetic Analysis 
DOI: 10.17277/amt.2016.01.pp.042-048

42

Gladysheva T. V., Gladyshev N. F., Dvoretsky S. I. Advanced Composite Material for Air Regeneration Systems of Individual and Collective Protection 
DOI: 10.17277/amt.2016.01.pp.049-055

49

Poluektov V. L., Khudyakov V. V., Baronin G. S., Buznik V. M. Features of Combined Solid-Phase Extrusion Technology, Structure and PropertyFormation of Fluoropolymer-Based Nanocomposites 
DOI: 10.17277/amt.2016.01.pp.056-060

56

Kulikov G. M., Mamontov A. A., Plotnikova S. V., Kulikov M. G., Mamontov S. A. Sampling Surfaces Formulation for Functionally Graded and Laminated Composite Shells 
DOI: 10.17277/amt.2016.01.pp.061-066

61

Lyubimova D. A., Ponomarev S. V., Divin A. G. Measuringthe Thermal Diffusivity of Multi-Layered Graphene Nanoplatelets (GNPs) by a Periodic Heating Method 
DOI: 10.17277/amt.2016.01.pp.067-074

67

 

 

Abstracts in Russian

75

Publication Ethics and Publication Malpractice Statement

79

 

Valitov V.A. Deformation in Superplasticity Regime an Effective Method of Producing Components from Hetero- Phase Nickel-Based Alloys with Functional-Gradient Properties ………………………………………………………………

3

Milyaev I.M., Alymov M.I., Yusupov V.S., Zelensky V.A., Milyaev A.I., Ankudinov A.B. Hard Magnetic Properties of Mn-Al-C Alloys Doped with Titanium and Iron ………………………………………………………………………………...

12

Stelmakh L.S., Stolin A.M. Computer Modelling of New Experimental Schemes of SHS-Extrusion …………………..

15

Sanin V.N., Ikornikov D.M., Andreev D.E., Sachkova N.V., Yukhvid V.I. Synthesis of Cast High Entropy Alloys with a Low Specific Gravity by Centrifugal Metallothermic SHS-Methods ………………………………………………....

22

Kulnitsky B.A., Blank V.D. Iron Carbide Formation inside Carbon Nanotubes ……………………………………………..

32

Bazhin P.M., Stolin A.M., Konstantinov A.S. The Impact of Mechanical Effects on Granulometric Composition of TiB– Based Materials ………………………………………………………………………………………………………….

38

Pervukhina O. L., Denisov I.V. The Specifics of Producing Steel to Brass Bimetal Using Explosion Welding …………

42

Khachaturova T.A. Volt-Ampere Characteristics of Tunnel Junctions from Ferromagnetic Materials …………………

45

Akulinin E.I., Ishin A.A., Skvortsov S.A., Dvoretsky D.S., Dvoretsky S.I. Optimization of Adsorption Processes with Cyclic Variable Pressure in Gas Mixture Separation …………………………………………

49

Vigdorovich V.I., Zhukovskaya Т.V., Tsygankova L.E., Esina M.N., Shel N.V. Analytical Evaluation of the Amount of Extracted Quantities of Sorbate and Sorbent Dynamic Capacity under Sorption Purification of Flow Solutions ……...

59

Yartsev V.P. Cement and Gypsum Concretes with Construction Aggregates and Industrial Wastes …………………….

65

Abstracts in Russian …………………………………………………………………………………………………………..

75


Notice: Undefined offset: 0 in /hosting/journal/data/templates/meet_gavern/lib/framework/helper.social.php on line 28